Description
Epoxy resin concrete bonding agent
Description
Nitobond EP is based on solvent free epoxy resins containing pigments and fine fillers. It is supplied as a two part material in pre-weighed quantities for ready onsite mixing and use. Coloured components – white base and green hardener – provide visual evidence that adequate mixing is achieved.
Uses
For bonding fresh wet cementitious materials to existing cementitious surfaces. For use on horizontal surfaces or on vertical surfaces where mortar or concrete can be supported by formwork. The long ‘open’ life makes it suitable for use with formwork or where additional steel reinforcement has to be fitted. The product is ideal for roads, bridges, pavements, loading bays and factories, building segment and for bonded or granolithic floor toppings. Nitobond EP is equally suited to internal and external applications.
Nitobond EP may also be used as part of a repair system where a bonding agent is required or where the substrate is likely to remain permanently damp or wet.
Advantages
Nitobond EP can be applied by brush.
- More overlay time : Enables to place the concrete for longer period of time, without risk of delamination.
- High bond strength : Bond strength is more than the tensile strength of good quality concrete
- Barrier coat : Acts as a ‘barrier coat’ to the migration of chloride ions from host concrete.
- Can be applied on to dry or damp substrates
Coverage
Nitobond EP – Approximately 2.6 m2/litre.
Actual coverage will depend upon the texture and porosity of the substrate being covered.
Additional information
| Brand | Fosroc |
|---|---|
| Pack Size | 4 Ltr. |
