TECHSEAL PU2

Description

TWO PART POLYURETHANE JOINT SEALANT

DESCRIPTION

TECHSEAL PU2 is a high performance two component polyurethane sealant. When cured, It forms a tough, flexible seal and bond capable of cyclic, expansion and compression movement. Joints or fabrications formed with this sealant can be expected to extend and compress a total of (± 25%) of original joint dimensions.

TechsealPU 2 is virtually unaffected by normal weathering conditions such as rain, sunlight, snow, sleet, ultra-violet radiation, ozone, atmospheric contamination and pollution. Its excellent weather ability enables it to retain its original properties after years of exposure. Its physical properties remain relatively unchanged over a wide temperature range (-20°C to 70°C).

RECOMMENDED USES 

• For sealing floor joints.
• Granite, sandstone and marble pointing GRC, Fiberglass & Specialty panel systems.
• Metal curtain wall facades.
• Potable water tanks.
• Sealing gaps and adhering facade and cladding panels to various building materials.
• Sealing construction and expansion joints.
• For sealing of concrete joints in airport runways.

COVERAGE

Sealant:To estimate the no. of running met work can be done byTECHSEALPU2. Can be very easily estimated by using the following formula:-

L= 660 / (W X D)

Where, L= Length of the joint in linear running meter

W = Width of the joint in mm. D = Depth of the joint in mm.

Primer:1 lit. of primer is required per 15kgs of sealant.

Additional information